Semi-automatic machine ET-1650E is designed for wrapping stretch film on pallets. This machine has six winding modes (five programmable and one manual), which allow you to select for each type of load the desired number of layers of film. When using this machine you get: cargo safety, consistently good packaging quality, saving on consumables.
Warranty 12 months.
Five automatic modes of this model allow you to store 5 different programs in the memory of the palletizer, for each of which parameters are set:
- number of windings below the pallet. Because it is on the bottom of the pallets that the load is greatest during transportation - it is recommended to make more windings;
- number of windings at the top of the pallets;
- carriage speed up/down;
- number of carriage passes.
This model is semi-automatic, therefore, requires the participation of an operator who must:
- install a pallet in the working area of the palletizer;
- fix the edge of the stretch roll at the base of the pallet;
- run one of five programs or conduct a manual winding;
- crop the stretch and remove the pallet.
This model is NOT equipped with a ramp, but it can be ordered separately.
- Soft START/STOP rotation of the platform in the initial / final stage wrap;
- Regulation of the platform rotation speed from 1 to 15 rpm;
- Six winding programs;
- Automatic detection of cargo height on a pallet;
- Maximum pallet weight - 2000 kg;
- Maximum pallet height - 2300 mm;
- Turntable diameter - 1650 mm;
- Turntable height - 80 mm;
- Drive turntable - chain;
- Drive of the carriage with the film - chain;
- Installed capacity engine platform - 0.75 kW;
- Installed capacity carriage motor - 0.18 kW;
- Overall dimensions: 1530 * 1650 * 2580;
- Weight - 650 kg;
- Voltage - 220V, 50 Hz;
- Productivity - up to 24 pallets per hour;
- Roll dimensions stretch film
- max width - 500 mm;
- max diameter - 240 mm.
Why should you buy this equipment from us?
|FREE SHIPPING||We will deliver your chosen car to any of our branches: Zaporizhia, Dnipro, Kiev, Kropyvnytskyi, Lviv, Odessa, Sumy, Kharkov, Kherson.
This is a large-sized equipment - not all provide delivery for free.
|START-UP||Our experts can carry out commissioning and training: turnkey start-up.
Only thanks to full-time service engineers can we do this.
|FIRST-HAND||We ourselves import these machines. We buy them directly from the manufacturer, communicating with him directly, without intermediaries.
That is why we can offer you mutually beneficial conditions ...
|MATERIAL BASE||Our many years of experience have shown that the purchase of equipment must necessarily be accompanied by the supply of basic spare parts. This allows you to quickly fix possible problems both during the warranty period and after the warranty. Thanks to our experience, guarantees and our SC - you can be sure that the equipment will work for several years.
The task of some is simply to sell, but only experienced people understand that what is very important is the possibility of long-term work, and without service people it is impossible.